Festo QS-G1/8-6-I-100 (133009) Push-In Fitting
€1.78
Excl. 19% VAT , excl. Shipping Cost
Article
FES-133009
Manufacturer Nr.
QS-G1/8-6-I-100
Push-In Fitting
Festo QS-G1/8-6-I-100 (133009) Push-In Fitting is available to buy in increments of 100
Frequently Bought Together
- This Item: €1.78Excl. 19% VAT , excl. Shipping Cost
- Festo QSW-3/8-10 (130602) Push-In Fitting €6.90Excl. 19% VAT , excl. Shipping Cost
- Festo QSH-8-6-50 (130719) Push-In Sleeve €1.87Excl. 19% VAT , excl. Shipping Cost
Total price
| size | Standard |
| Nominal width [mm] | 4,2 |
| Seal type on stud | gasket |
| installation position | arbitrary |
| Packing size | 100 |
| Construction set up | Push-pull principle |
| Operating pressure complete temperature range [bar] | -0.95 to 6 |
| Temperature depending operating pressure [bar] | -0.95 to 14 |
| Maritime classification | see Certificate |
| Operating medium | Compressed air to ISO 8573-1:2010 [7:-:-] Water according to manufacturer declaration at www.festo.com |
| Information about operating and control medium | Oiled operation possible |
| Corrosion resistant class KBK | 1 - low corrosion stress |
| ambient temperature [°C] | -10 to 80 |
| Product weight [g] | 8,3 |
| Pneumatic connection 1 | Male thread G1/8 |
| Pneumatic connection 2 | For hose exterior diameter 6 mm |
| Sleeve colour | blue |
| Material information | RoHs compliant |
| Housing material | brass nickel-plated |
| Sleeve material | POM |
| Tube seal, hose seal material | NBR |
| Hose clamping segment material | High-alloyed stainless steels |
| Nominal tightening torque [Nm] | 7,00 |
| Tolerance to nominal tightening torque | ± 20 % |
| Manufacturer Nr. | QS-G1/8-6-I-100 |
|---|---|
| Manufacturer | Festo |
| EAN | 4052568029005 |
| Weight | 0.008200 |
| HS-Code | 74122000 |
Customers Who Bought This Item Also Bought
