Festo NPQH-D-G38-S10-P10 (578367) Push-In Fitting
€2.20
Excl. 19% VAT , excl. Shipping Cost
Article
FES-578367
Manufacturer Nr.
NPQH-D-G38-S10-P10
Push-In Fitting
Festo NPQH-D-G38-S10-P10 (578367) Push-In Fitting is available to buy in increments of 10
Frequently Bought Together
- This Item: €2.20Excl. 19% VAT , excl. Shipping Cost
- Festo NPQH-D-G18-S8-P10 (578362) Push-In Fitting €2.00Excl. 19% VAT , excl. Shipping Cost
- Festo NPQH-T-G18-Q4-P10 (578392) Push-In T-Fitting €5.95Excl. 19% VAT , excl. Shipping Cost
Total price
| size | Standard |
| installation position | arbitrary |
| Packing size | 10 |
| Operating pressure complete temperature range [bar] | -0.95 to 20 |
| Certified awarding point | NSF C0523185 |
| Operating medium | Compressed air to ISO 8573-1:2010 [7:-:-] Water according to manufacturer declaration at www.festo.com |
| Information about operating and control medium | Oiled operation possible |
| Corrosion resistant class KBK | 3 - severe corrosion stress |
| Food compatibility | NSF/ANSI 169 siehe Konformitätserklärung |
| ambient temperature [°C] | 0 to 150 |
| Product weight [g] | 22,5 |
| Pneumatic connection 1 | Male thread G3/8 |
| Material information | RoHs compliant |
| Housing material | Nickel-plated brass |
| Nominal width [mm] | 8,00 |
| Seal type on stud | gasket |
| Construction set up | Push-pull principle |
| Max. tightening torque [Nm] | 25,0 |
| Pneumatic connection 2 | Plug sleeve QS-10 |
| Thread sealing material | FPM |
| Sleeve material | Nickel-plated brass |
| Manufacturer Nr. | NPQH-D-G38-S10-P10 |
|---|---|
| Manufacturer | Festo |
| EAN | 4052568060701 |
| Weight | 0.023000 |
| HS-Code | 74122000 |
Customers Who Bought This Item Also Bought
